Best ways to cut metal fast and precisely

Best ways to cut metal fast and precisely

Your probably trying to figure out some simple methods to use when cutting metal's. I'm going to provide you with a Cutting guide that will help you get this process going.

Other Tools to Use for Cutting Metals Quicker for Your Safety

A majority of people use old fashioned hacksaws to cut metal but the best and easiest technique and tool.

Plasma cutting being one of those methods where when you cut straight through electrical materials, your really cutting through an high beamed jet of hot plasma. These specific materials can be cut with a torch that consist of aluminum, steel, copper, stainless steel and also brass.

A welding jacket which is made from real thick leather, prevents metal and sparks from burning your clothes and even skin.

An Auto-darkening helmet let's you see through its face shield until the gun sparks. When a spark is detected, the shield darkens to protect your eyes.

An apron is used to keep your clothes protected from non-welding jobs, such as cutting or grinding

Cutting with a Circular Saw

In today's society, many people don't see a need in using a circular saw for cutting metal. When using the proper blade, these saws come in handy especially when cutting through rebar materials.

Mild steel can be cut up to 3/8in.thickwhen using a metal cutting blade that is ferrous. You have to keep in mind though that this particular type of hot metal can potentially fly all over the place.

Always ensure that safety gear is on when handling these materials. Ferrous metal cutting blades are found at your local hardware stores, online and home centers. The blades that can be used are the inexpensive steel blades and carbide blades. The only difference besides the prices of them both is that carbide blades last longer.

Cutting Aluminum with a Miter Saw

Cutting with a Matter Saw is easy to use to cut on tubes, angles, aluminum rods and a blade to cut on a metal that's not ferrous. You can easily tape a piece of cloth over the opening of the motor housing of the saw to protect it from collecting metal chips and the motor winding while cutting the aluminium.

Make sure to remove it when your saw is being placed backwards onto the regular service to ensure that the motor does not overheat. To reduce the dangers of metal shards from flying, trap the aluminum with a wood backer which makes it much simpler to keep the metal in place for cutting.

This can also come in handy when your cutting thin walled pieces. If one does not use the back board, the blade will then be caught onto the metal sometimes and disorder it making it unusable.

Safely Cutting Metal

To avoid all eye injuries from cutting metal, its best to follow these specific rules:

Observe and read thoroughly over the safety precautions that are printed and placed on blades, metal cutting discs and any other special equipment.

At all times, wear safety glasses, a face shield which can range from about $8 to about $30 and also be sure to wear hearing protection to protect yourself from long-term hearing problems.

Cover any exposed to the proper attire such as a long sleeve shirt, pants and gloves that have a protectant over them, usually ones made for warehouse.

Be sure to allow freshly cut hot metal to cool before picking it up and handling it seeing as though it can cause serious and dangerous burns to occur.

Regardless if you are wearing gloves just for blades and hot equipment, make a note to also have them when handling metal that could possibly have sharp edges.

Securely place and clamp the metal before having to handle and cut it.

The last safety thing to remember is to never allow have anyone in or around your area while your cutting metal of course unless their wearing the safety equipment such as hearing and eye protection.

Stainless Steel Cutting with a Grinding Disc

There are various types of stainless steel, some of which are very difficult to cut through. A rotary tool can be used to cut small jobs that consist of cutting stainless steel with backsplash tiles because its fitted with a cutting disc that is abrasive and works just fine. An angle grinder works best with much larger jobs.

Working with Just a Simple Score and Snap

Roofers and Contractors make scoring and snapping a routine for aluminum flashing and sliding which creates descent and precise cuts. This technique also is used to create straight cuts in aluminum or even sheet metal including that of steel.

Hold together a straight edge or square along the cutting marks and catch a score with a line with the tip of a sharp knife blade. Next bend it back and forth only a few times to ensure that it snaps.

This is also the same exact method used for steel studs. Once you snap both sides, score a line in between the cuts and bend it enough to break it apart.

Inbetween Tight spaces with an Oscillating Tool

When you need to make a flush cut, an oscillating tool surrounded with a metal blade will provide you with a solution.

The mounting nuts located on faucets and toilets are easy to cut off with this special tool. It also cuts pipes from plumbing, bolts, nails and some other metal objects in areas where larger tools have no chance of fitting.

Blade Should Intertwine with the Metal

You are able to cut any metal with the help of the right grinding disc or blade. You have to just make the metal and blade match together. There are exactly two types of metal, nonferrous and ferrous. Ferrous is the act of any metal that has iron and only requires a ferrous metal cutting blade.

This Cutting guide is exactly what is needed to ensure the safety of you and others around you when working with tools.

Next Post